Lindy 42953 - Manual (Page 19)

USB 2.0 Link Cable User’s Manual 18
8. FAQ
Q: What if the USB 2.0 Link cable can’t be successfully installed?
A: This situation is common when your USB 2.0 port is a PCI card.
If your USB 2.0 PCI Card uses a Microsoft driver then please download version
5.1.2600 (used with Windows 2000 & XP) from the Microsoft Web site.
Q: How do I know the two PC’s are successfully connected?
A: The bottom of the screen will show “Remote Connected” on both computers.
Q: Should I un-install the driver each time the cable is unplugged?
A: You don’t have to un-install the driver each time you unplug the cable. Unless
you don’t want to use the cable any more, then you could un-install it and
remove the driver from your PC.
Q: How can I connect 3 PCs to form a USB Network?
A: Connect the USB type A male connector of Cable#1 to PC1, connect USB type
A male connector of Cable#1 to PC2. Then connect USB type A male connector
of Cable#2 to PC2 and connect USB type A male connector of Cable#2 to PC3.
If you want to connect PC4 to this USB Network then connect Cable#3 to PC1
and PC4.
9. Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding
the accuracy and completeness of this document and shall in no event be liable for
any loss of profit or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any
means, electronic or mechanical, including photocopying, recording or information
recording and retrieval systems without the express written permission of the
manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.