Lowrance electronic Lowrance GlobalMap 5200C - Manual (Page 124)

118
Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press
EXIT
re-
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press
↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press
ENT
|
ENT
.
B. Or you can jump down to the lower selection list by pressing
ENT
,
then press ↓ or ↑ to select a waypoint from the list, then press
ENT
. The
waypoint information screen appears.
Find By Name menu, left. Waypoint Information screen, center. At right,
the found waypoint is highlighted by the cursor on the Map Page.
A. To navigate to the waypoint, press
ENT
. Go To Waypoint command
is already highlighted. The unit will show navigation information to
the waypoint.
B. To find the waypoint, press
↓ to
F
IND
O
N
M
AP
|
ENT
. The Map Page
appears with the cursor highlighting the found waypoint.