Mounting the unit: bracket, in-dash or portable – Lowrance electronic Lowrance GlobalMap 5200C User Manual

Page 25

Advertising
background image

19

Mounting the Unit: Bracket, In-Dash or Portable

You can install the GlobalMap on the top of a dash with the supplied

gimbal bracket. It can also be installed in the dash or mounted on a

portable power supply. If you use the supplied bracket, you may be in-
terested in the optional R-A-M

®

bracket mounting system. This con-

verts the unit's gimbal bracket to a swivel mount, which can be used on

the dash or overhead mounting positions.
Installation instructions are supplied with the R-A-M mounting kits.

R-A-M offers permanent mounts and temporary mounts suitable for many

vehicle types. See your Eagle dealer or visit the LEI web site (

www.lei-

extras.com

) for the latest options; accessory ordering information is

on the inside back cover of this manual. For a complete look at the

many mounting options, visit the RAM web site at

www.ram-mount.com

.

Optional R-A-M mounting system.

Bracket Installation
Mount the GlobalMap in any convenient location, provided there is clear-

ance behind the unit when it's tilted for the best viewing angle. You should

also make sure there is enough room behind the GlobalMap to attach the

power and GPS antenna/receiver module cables.
A drawing on the next page shows the dimensions of a gimbal-mounted

GlobalMap. Holes in the bracket's base allow wood screw or through-

bolt mounting. You may need to place a piece of plywood on the back

side of thin fiberglass panels to reinforce the panel and secure the

mounting hardware.

Advertising