Lexmark 1300 Series - Manual (Page 22)

Load up to Make sure
20 sheets of banner paper • You remove all the paper from the paper support before loading the
banner paper.
• You tear off only the number of pages needed to print the banner.
• The banner paper is placed on a level surface behind the printer and
fed up over the paper support.
• You have selected the correct paper size for the banner in Print
Properties. For more information, see “Using Print Properties” on
page 16.
• The paper is loaded against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
100 sheets of custom-size paper
(depending on the thickness) • The print side of the paper faces you.
• The paper size fits within these dimensions:
Width:
– 76–216 mm
– 3.0–8.5 inches
Length:
– 127–432 mm
– 5.0–17.0 inches
• The paper is loaded against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
22