2 suggested tool requirements, 1 preparation of sleeve, 2 preparation of the front grille – LG 230/208V User Manual
Page 18: Sleeve hardware
Advertising
—18—
3.2.1 PREPARATION OF SLEEVE
ASSEMBLE THE WALL SLEEVE
• Raise the sleeve side panels to upright position as shown on
the right.
• Place sleeve upper on top of side panels.
• Fasten the four screws as shown on the right.
• Assemble drain kit.
• Fasten this assembly to the each side of the wall sleeve as
shown on the right.
• Assemble the outdoor grille and fasten the 4 screws as
shown on the right.
3.2.2 PREPARATION OF THE FRONT GRILLE
Carefully remove shipping tape, if there is any, from the front
grille.
SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
IN
DO
OR
IN
DO
OR
INDOOR
IN
DO
OR
IN
DO
OR
1
4
1
2
1
1
Shipping tape
IN
DO
OR
3.2 SUGGESTED TOOL REQUIREMENTS
SLEEVE HARDWARE
NUMBER
NAME OF PARTS
Q’TY
SLEEVE LOWER
1
SLEEVE UPPER
1
SCREW
4
OUTDOOR GRILLE
1
DRAIN KIT
1
Advertising