Lindy 32408 - Manual (Page 3)

English
Introduction
LINDY 2 & 4 port monitor splitters allow you to duplicate the video signal from your PC for output to multiple
monitors.
The 2 port splitter (Part No. 32407) outputs video to two separate monitors, while the 4 port splitter (Part No.
32408) provides video output for up to 4 separate monitors.
Features
 Supports VGA, SVGA, XVGA, and Multi-sync monitors
 DDC2 function supports “Plug & Play” monitors
 High bandwidth up to 250MHz
 High resolution support (up to 1920 x 1440)
 Transmission distance up to 50m
Package contents
2 port monitor splitter (32407)
 2 port monitor splitter card
 Internal power cable
 VGA output connection cable
 Fitting screw
 Instruction manual
4 port monitor splitter (32408)
 4 port monitor splitter card
 Internal power cable
 VGA output connection cable
 4-way monitor splitter cable
 Fitting screw
 Instruction manual
Optional video cables
To maintain optimal image quality we recommend the following LINDY Premium Gold monitor extension cables.
Installation
1. Fit the card into a spare back-plate slot and secure using the supplied screw
2. Connect the internal power connector to a 5¼” connection from the computers power supply
3. Using the VGA output connection cable, connect the computers video output to the input on the splitter card
marked ‘PC’
4. For the 2 port model connect the monitors to the connections marked ‘M1’ & ‘M2’
5. For the 4 port model connect the 4-way monitor splitter cable to the connection marked ‘M1-M2-M3-M4’. Plug
each monitor into the individual connections on the splitter cable.
2m 37230 10m 37233 30m 37236
3m 37231 15m 37234 40m 37237
5m 37232 20m 37235 50m 37238