Life Fitness 95CI User Manual
Page 10
9
S
TARTING
U
P THE
B
IKE
C
ONSOLE
When a user begins pedaling on the Lifecycle exercise bike, the unit’s Auto-Start feature
powers up the console, causing the console display to light up and the MESSAGE CENTER to
flash a prompt: “SELECT WORKOUT OR PRESS QUICK START.” If the user does not make a
selection in 20 seconds, the console automatically starts a MANUAL workout. For information on
setting up a workout, see Section 4.2, titled Using the Workouts. If the user stops pedaling for more
than 15 seconds, the console shuts down.
Alternately, the user may begin pedaling at a predetermined rate and press the START key to
power up the console.
U
SING THE
P
OWER
A
SSIST
O
PTION
The Lifecycle exercise bike’s optional Power Assist feature makes it possible for the console to
be powered by an external electrical source, eliminating the need to pedal at a minimum speed
to supply constant power to the console. With this option, users who wish to ride the bike for
rehabilitative exercise may pedal at a rate below the minimum without losing console power.
Enabling the Power Assist option requires a an optional kit. To order the kit, contact Life Fitness
Customer Service. See section 6.5, titled How to Obtain Product Service, for more information.
The connector plugs into the bike at the front of the frame, near the base.
F
ITNESS AND
E
NTERTAINMENT
N
ETWORKING
Two interchangeable network ports allow the Lifecycle exercise bike to be connected to a fitness
entertainment system and/or a network, such as FitLinxx
®
interactive fitness network.
•
Fitness network: The network connection enables the console to upload user workout
statistics to a fitness network database or to download remotely stored information, such
a pre-set workout program. See Section 4.2, titled Using the Workouts, for information
on logging onto a network.
•
Entertainment: The network connection enables the console to power a third-party
receiver for use with a service such as the Cardio Theater
®
entertainment system or the
BroadcastVision
TM
entertainment system.
These ports are located on the back of the bike console and are enclosed by a removable cover.
Any use of the ports for other than their intended purpose could void the product warranty.