Lenovo Z61t - Manual (Page 35)

Chapter 4. Recovery options
Using Rescue and Recovery
If Windows is not running properly, use the Rescue and Recovery workspace
to help solve or identify your problem. Do the following:
1. Turn off your PC, then turn it on again.
2. Watch the screen carefully while your PC starts. When “To interrupt
normal startup, press the blue ThinkVantage button” message is displayed
at the lower left of the screen, press the blue ThinkVantage button. The
Rescue and Recovery workspace opens.
3. After the Rescue and Recovery workspace opens, you can do the
following:
v Rescue and Restore your files, folders, or backups.
v Configure your system settings and passwords.
v Troubleshoot and diagnose problems using diagnostics.
For more information about using Rescue and Recovery features, see the
“Recovery overview” section of the Access Help.
Restoring factory contents
Instead of providing a recovery CD or a Windows CD with your computer,
Lenovo provides simpler methods of accomplishing the tasks typically
associated with these CDs. The files and programs for these alternative
methods are on your hard disk, which eliminates having to locate misplaced
CDs and problems associated with using an incorrect CD version.
The complete backup of all the files and programs that Lenovo preinstalled on
your computer resides in a hidden protected area, or partition, of the hard
disk. Although hidden, the backups in the partition consume hard disk space.
Therefore, when checking the capacity of your hard disk according to
Windows, you might note that the total capacity of the disk appears to be
smaller than anticipated. This discrepancy is explained by the contents of the
hidden partition.
The Product Recovery Program contained within this area enables you to
restore the complete contents of your hard disk to the same state as it was
when originally shipped from the factory.
© Copyright Lenovo 2006 27