Lexmark 7300 Series - Manual (Page 90)

1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
1
2
3 Reinsert the print cartridges.
Received fax has poor print quality
Ask that the sender:
• Check that the quality of the original document is satisfactory.
• Resend the fax. There may have been a problem with the quality of the telephone line connection.
• Increase the fax scan resolution.
Change the fax quality setting:
1 From the control panel, press Fax Mode.
2 Press Quality.
3 Press or repeatedly to select a higher fax quality.
4 Press to save the setting.
Check the ink levels and install a new print cartridge if necessary.
Decrease the transmission speed.
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Send Setup appears.
4 Press .
5 Press or repeatedly until Max Speed appears.
6 Press .
7 Press or to select a lower transmission speed.
8 Press to save the setting.
90