Linn Kolektor - Manual (Page 17)

22
Changing user options
The KOLEKTOR provides 12 user options to allow you to change
the way the unit operates to suit your personal preferences.
To change the user options
VOL- SWITCH ON
POWER
""""
1 0
Switch off the KOLEKTOR, using the power switch on the front
panel.
Press and hold down VOL- (front panel) and switch on the power
again.
Keep VOL- held down until the progress bar display is complete
and the display shows Options. The display will then change to
show the first user option and its value.
In each case the display shows the option number on the left, and
the option value on the right.
To choose a specific user option
VOL-
1 0
2 1
Press VOL- (front panel) until the display shows the number of the
user option you want to change, together with its current value.
Each time you press the key the display shows the next user
option, stepping back to user option 1 after user option 12.
7
Replacing the fuses
The KOLEKTOR Preamplifier requires two fuses. To replace the
fuses first identify the correct fuses for your local voltage; see
Specifications, page 30, for the fuse ratings.
The fuse compartment is located below the mains inlet on the back
panel. To replace the fuses pull open the compartment like a
drawer, flip down the cover, and remove the two original fuses.
Then insert the two replacement fuses, and close the fuse
compartment.
WARNING: This appliance must be earthed. Use the earthed
moulded mains lead supplied. Never use an unearthed plug or
adaptor.
Positioning the KOLEKTOR
You can position your KOLEKTOR Preamplifier almost anywhere
you find convenient, but the following considerations may be
useful.
The KOLEKTOR Preamplifier can be placed on top of other Linn
products, provided you allow plenty of air circulation around
components that generate heat, such as power amplifiers.
If you are using the phono input you may need to keep the
KOLEKTOR up to 30cm away from a power amplifier.
Locating the KOLEKTOR for use with the handset
The Linn infra-red control system is exceptionally sensitive, and you
should be able to operate your KOLEKTOR with the handset from
almost anywhere in a room. For best results the infra-red sensor on