Logan Graphic Products LONG F100-4 - Manual (Page 7)

Instruction Manual Model F100-4 SAW FENCE KIT
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com
6
Trouble Shooting
Problem Solution
Scale did not lay in correct position. As long as the scale has not been pressed/rubbed into position
thereby “fixing” the adhesive it should be possible to carefully
remove/lift scale off the fence and re-position.
Moulding lengths are not consistent. Make sure fence is secure.
Clamp left hand side of moulding first when using the stop.
Remove any saw dust, splinters and debris from between the
moulding and fence and the moulding and the stop.
Clamp does not hold moulding firmly. Turn clamps 90 degrees so that they press the moulding into the base
and back of fence.
Make sure the clamp posts are tight.
Difficult or slow cutting. Make sure the saw blade is correctly installed (teeth facing away
from saw handle).
Replace saw blade.
Saw does not cut straight. Increase blade tension using knurled nut under handle.
Tighten both swivel screws on back of saw base equally.
Make sure moulding is securely clamped.
Tighten down on the angle block pointer, be sure you can still move
the saw from left hand 45˚ to the right hand 45˚ marks.
Warranty
Logan Graphic Products, Inc. (“Logan”) warrants the Studio Fence Kit - Model F100-4, to be free from defects in parts
and workmanship for a period of one year from the date of original purchase. Logan warrants that it will either repair or
replace, at it’s sole discretion, any necessary replacement parts found to be defective. Should the product need to be
returned to Logan for repair or replacement parts, authorization for any return must come from Logan in writing. Costs
of returning the product to Logan, including insurances, shall be borne by the purchaser. Logan shall not be liable for
any damages or losses, incidental or consequential, direct or indirect, arising from the use of this product. This war-
ranty extends only to the original purchaser and is not assignable or transferable. This warranty is in lieu of all other
warranties, expressed or implied.