Lindy 25120 - Manual (Page 4)

Manual
LINDY HomePlug Ethernet Bridge Page 4
Software Installation (Optional)
Note: Windows may look different on
other platforms!
1.
Do not connect the Ethernet Bridge to
your computer yet! Insert the CD into
your CD-ROM drive. If the CD doesn’t
automatically load, run -
<CD Drive Letter>:\eth\setup.exe
Click on ‘Next’ to start the installation
2. Enter a User Name and Organisation, and
select either ‘Anyone who uses this
computer’ or ‘Only for me’, according to
your preference.
Click ‘Next’ to continue.
3.
Review or change your installation
settings, then click ‘Install’.