LG 44VK MU-42 - Manual (Page 18)

18 Plasma Display
Operation
- Timer functions operate only if current time has been set.
- Off-Timer function overrides On-Timer function if they are set to the same time.
- The monitor must be in standby mode for the On-Timer to work.
On/Of On/Of f f T T imers Setup imers Setup
1. Press the MENU button and then use D / E button to select the TIMER menu.
2. Press the G button and then use D / E button to select Off timer or On timer.
3. Press the G button and then use D / E button to select On .
• To cancel On/Off timer function, select Off .
4. Press the G button and then use D / E button to set the hour.
5. Press the G button and then use D / E button to set the minutes.
6. For only On timer function; Press the G button and then use D / E button to set
sound level.
7. Press the ENTER button to save.
Clock Setup Clock Setup
1. Press the MENU button and then use D / E button to select the TIMER menu.
2. Press the G button and then use D / E button to select Clock .
3. Press the G button and then use D / E button to set the hour.
4. Press the G button and then use D / E button to set the minutes.
5. Press the ENTER button to save.
T T imer Menu Options imer Menu Options
TIMER
Prev.
Clock G G
Off timer
On timer
Auto off
TIMER
MENU
- - : - -
Sleep Sleep T T imer imer
- The Sleep Timer turns the Monitor off at the preset time. Note that this setting is cleared when the monitor is turned off.
1. Press the SLEEP button repeatedly to select the number of minutes. First the --- Min option appears on the
screen, followed by the following sleep timer options:
10, 20, 30, 60, 90, 120, 180, and 240 minutes.
2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to
count down from the number of minutes selected.
3. To check the remaining minutes before the monitor turns off, press the SLEEP or ENTER button once.
4. To cancel the Sleep Timer, press the SLEEP button repeatedly until --- Min appears.
Auto Of Auto Of f f
- If there is no input signal, the Monitor will turn off automatically after 10 minutes.
1. Press the MENU button and then use D / E button to select the TIMER menu.
2. Press the G button and then use D / E button to select Auto off .
3. Press the G button and then use D / E button to select On or Off .
4. Press the ENTER button to save.
zz
zz
TIMER
Prev.
Clock
Off timer
On timer
Auto off G G
TIMER
MENU
On
Off
TIMER
Prev.
Clock
Off timer
On timer G G
Auto off
TIMER
MENU
10 : 30
Vol. 30
Ch. TV 2
On
Off
- If current time setting is erased by a power failure, if TV is unplugged or if the monitor is turned off with
the ON/OFF button on the monitor, reset the clock.