LG 44VK MU-42 - Manual (Page 23)

Owner’s Manual 23
Operation
Split Zoom Split Zoom
- Enlarges the picture in correct proportions.
- Split Zoom can be used for all input sources.
- In 2-Split Zoom mode, you can only move the image up or down.
- If an image is enlarged, a section can be viewed without using Split Zoom.
- Split Zoom is not available if
OSD rotate is rotate .
1. Press the SPLIT ZOOM button repeatedly to select either 2, 4, or 9 Split Zoom.
2. Press the number button corresponding to the section you wish to enlarge. you can move the enlarged screen
with using the D / E / F / G button.
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset
VGA Mode G G
640x480
848x480
852x480
SCREEN
MENU
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset
YNR G G
On
Off
SCREEN
MENU
Selecting W Selecting W ide VGA ide VGA mode (RGB-PC, DVI-PC mode only) mode (RGB-PC, DVI-PC mode only)
- To see a normal picture, match the resolution of RGB mode and selection of VGA mode.
1. Press the MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select VGA Mode .
3. Press the G button and then use D / E button to select the desired VGA resolution.
4. Press the ENTER button to save.
1
4
2-Split zoom
1 2
5 4
4-Split zoom
1 2 3
4 5 6
7 8 9
9-Split zoom
Example of choosing 5.
Section 5 is enlarged to fill
the screen.
1 2 3
4 5 6
7 8 9
9-Split zoom
- Use YNR to reduce the picture noise that may appear on the screen.
Luminance Noise Reduction (V Luminance Noise Reduction (V ideo, S-V ideo, S-V ideo and Component 480i modes only) ideo and Component 480i modes only)
1. Press the MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select YNR .
3. Press the G button and then use D / E button to select On or Off .
4. Press the ENTER button to save.