Lenovo T54H - Manual (Page 4)

5
DEUTS
C
H
EN
GLI
S
H
F
R
ANÇAIS
ES
P
A
ÑOL
IT
ALIA
NO
JAP
ANE
SE
COMP
L & W
A
R
R
Connecting your Monitor
Analog cable:
Be sure to read the ‘Safety
Information’ at the front of
this User Guide before
carrying out this procedure. 1. Turn off your PC and all attached devices.
2. Connect the signal cable to the video port on the back of your computer.
This port might be directly attached to your computer (figure A), or it
might be part of a video adapter card (figure B). The video port on your
computer or video adapter card may be colored blue to match the blue
connector on your monitor’s video cable.
The AC adapter and signal
cable are connected to
your monitor. If you wish to
change these or to fit a different
stand, see Further Help on
page 25.
3. Connect the power cord to the power adapter first, then insert the plug
into a properly grounded electrical outlet.
Digital cable:
Be sure to read the ‘Safety
Information’ at the front of
this User Guide before
carrying out this procedure. 1. Turn off your PC and all attached devices.
2. Connect the signal cable to the video port on the back of your computer.
This port might be directly attached to your computer (figure A), or it
might be part of a video adapter card (figure B). The video port on your
computer or video adapter card may be colored white to match the white
connector on your monitor’s video cable.
U65C`tfuvq/cbdlvq/gn Qbhf 6 Xfeoftebz- Kvmz 23- 3111 5;1: QN