LevelOne SIP IP PBX VOI-9300 - Manual (Page 49)

2007-11-21 49 4
Firstly, you need to set up auto configuration for the IP Phone. The following example is for reference
only.
Auto Configuration: Select the HTTP protocol.
HTTP Server: IP address or URL of the IP-PBX.
HTTP File Path: Configuration file’s saved path, it must be “/conf/”.
Secondly, you need to configure for the IP PBX.
User-ID : The extension number of the telephone.
Server Address : The IP address or URL & port of the IP PBX.
Phone's Mac Address : The Mac address of the IP Phone.