Life Fitness Olympic Decline Bench - Manual (Page 8)

Signature Olympic Decline Bench
© 2007 Life Fitness, a division of Brunswick Corporation. All rights reserved.
Life Fitness is a registered trademark of Brunswick Corporation.
SODB 1/012/07 8183601 RevA-1
5. Attach the KNEE SUPPORT ASSEMBLY (D) to the PIVOT HUB (E) using
two M10 X 25mm BOLTS (4) and two 3/8" SAE WASHERS (5) as shown.
Tighten all BOLTS securely.
6. Attach the BACK PAD (16) and HEAD REST (17) to the CENTER FRAME
(1) using five M10 X 35mm BOLTS (18) and five 3/8" SAE WASHERS (5),
as shown. Tighten all bolts securely.
7. Install 1" HOLE PLUGS (19) into all open bolt holes.