Linksys EF1324 - Manual (Page 40)

EtherFast ® Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch
Add Static ARP Entry
The Add Static ARP Entry screen is used to add a static ARP entry.
• IP Address - IP address statically mapped to a physical MAC
address.
• MAC Address - MAC address statically mapped to the correspon-
ding IP address.
• Interface - The index number of the IP interface that will use
this static ARP entry. (Port “0” refers to the CPU.)
Select OK to return to the previous panel. Select Cancel to cancel any changes.
73
Instant EtherFast ® Series
Static ARP Table
The Static ARP Table screen is used to specify the static Address Resolution
Protocol.
• IP Address - IP address statically mapped to a physical MAC address.
• MAC Address - MAC address statically mapped to the corresponding
IP address.
• Interface - The index number of the IP interface that will use this static
ARP entry. (Port “0” refers to the CPU.)
Select Apply to make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Page to view the next
page. To display a specific page, set the page number in the Page field and then
press Apply. Select Add to add a static ARP entry.
72