LXI LX7007 - Manual (Page 24)

LX 7007 pro IGC V1.0 Apr.2005
Page 24
Each pilot has the capability, if needed, of protecting his configuration by means of a personal password. This ensures
that a particular pilot's configuration cannot be selected and altered by another pilot. If no pilot's name has been
programmed, then UNKNOWN will be displayed and the settings made during the last flight will be recalled.
The following parameters are retained and stored with individual pilot's names:
• Final glide: RESERVE (safety) height
• Flight Info
• Settings under LOGGER
• INIT
• DISPLAY
Parameters stored with the configuration password:
• TP
• OBSERVATION ZONES
• GPS
• UNITS
• GRAPHIC
• NMEA
• PC
• POLAR
• LOAD
• TE COMP.
• AUDIO
• INPUT
• LCD INDICATOR
• PAGE 1
• PAGE 3
New pilots can be added and existing pilots edited simply by pressing ENTER in the following screen:
The caption INSERT allows new pilots to be added up to a maximum of 30. The label Active in the first line means
that the pilot name shown has been selected during the initialisation and that his individual parameters are set.
Note!:
If a new pilot has been entered, or it is required to select a different pilot, then this can only be done by turning the
instrument OFF and then ON again, and then selecting the new pilot in the initialisation screen FLIGHT SETUP
- FLIGHT INFO (see Para 3.1.1.2)