LXI LX7007 User Manual
Page 54
LX 7007 pro IGC V1.0
Apr.2005
Page 54
3.1.1.2 Troubleshooting with LXE
• Available communication ports for LXE (Setup→Comm. Port)
Highlighted ports are ready to be selected.
5
Means that LXE will use checked port for communication with LX, there is no automatically
selection by LXE. Selection of comm. port should be done after first run of LXE.
• No ports available
After such message, no communication will be possible.
Reasons:
o PC has no serial ports (LAPTOP with USB only – the only solution is USB to RS232 adapter –
available in computer shops – necessary to install drivers
USB-232 adapter should be plugged in before starting LXe
o Ports are occupied by another applications – programs (E.g. Active sync program for communication
with PDA's)
Disabled
ActiveSync
Enabled
ActivSync