Linksys SRW2024 - Manual (Page 77)

67 Chapter 5: Using the Web-based Utility for Configuration
QoS Tab - Advanced Mode
WebView Switches
New Class Map screen
Class Map Name. Defines a new Class Map name
Preferred ACL. Indicates if packets are first matched to an IP based ACL or a MAC based ACL. The possible field
values are:
• IP Based ACLs. Matches packets to IP based ACLs first, then matches packets to MAC based ACLs.
• MAC Based ACLs. Matches packets to MAC based ACLs first, then matches packets to IP based ACLs.
IP ACL. Matches packets to IP based ACLs first, then matches packets to MAC based ACLs.
Match. Criteria used to match IP addresses and /or MAC addresses with an ACL’s address.The possible field
values are:
• And. Both the MAC-based and the IP-based ACL must match a packet.
• Or. Either the MAC-based or the IP-based ACL must match a packet.
MAC ACL. Matches packets to MAC based ACLs first, then matches packets to IP based ACLs.
New Aggregate Policer screen
Aggregate Policer Name. Enter a name in this field.
Ingress Committed Information Rate (CIR). Defines the CIR in bits per second. This field is only relevant when
the Police value is Single.
Ingress Committed Burst Size (CBS). Defines the CBS in bytes per second. This field is only relevant when the
Police value is Single.
Exceed Action. Action assigned to incoming packets exceeding the CIR. This field is only relevant when the
Police value is Single. Possible values are:
• Drop. Drops packets exceeding the defined CIR value.
• Remark DSCP (Out of Profile DSCP). Remarks packet’s DSCP values exceeding the defined CIR value.
• None. Forwards packets exceeding the defined CIR value.
Figure 5-43: Advanced Mode - New Class Map
Figure 5-44: Advanced Mode - New Aggregate Policer