LevelOne WBR-3402TX User Manual
Page 8
8
2.1.2. Rear Panel
Figure 2-2 Rear Panel
Ports:
Port Description
5VDC
Power inlet: DC 5V, 2A
ADSL
the port where you will connect your phone jack..
Port 1-4
the ports where you will connect networked computers and other
devices.
USB
USB Ports for USB printer.
2.2 Procedure for Hardware Installation
1. Decide where to place your WBR-3402, Wireless ADSL Router
You can place your ADSL Wireless Broadband Router on a desk or other flat surface, or you can
mount it on a wall. For optimal performance, place your ADSL Wireless Broadband Router in the
center of your office (or your home) in a location that is away from any potential source of
interference, such as a metal wall or microwave oven. This location must be close to power and
network connection.
2. Setup LAN connection
a. Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one
of the LAN ports of this product.
b. Wireless LAN connection: locate this product at a proper position to gain the best transmit
performance.