Lexmark 1500 - Manual (Page 45)

Understanding the parts of the printer
W
F I
I P R IN T IN G
1
2
3
4
6
5
7
8
9
10
11
12
Use the To
1 • Turn the printer on and off.
– If the printer is inactive for 30 minutes, the printer reverts to sleep mode to conserve
energy. Press or start a print job to turn the printer back on.
– When the printer is in sleep mode, pressing and holding for two seconds will
turn off the printer.
• Cancel a print job. Press in the middle of a print job.
• Be alerted for errors. For more information, see “Power light is blinking” on
page 69.
2 • Load or eject paper.
• Cancel a print job. Press in the middle of a print job.
3 A • Print on both sides of the paper (duplex). A green backlight comes on when the
duplex function is activated.
Note: This button is not functional with a Macintosh operating system. You can print
two-sided documents with a Macintosh operating system by using the settings in the
Two-Sided menu of the Print dialog.
• Be alerted for errors. For more information, see “Duplex light is blinking” on
page 70 and “Power light and duplex light are blinking alternately” on page 70.
4 PictBridge port Connect a PictBridge-enabled digital camera or a flash drive to the printer.
5 Card reader light Check card reader status. The light blinks to indicate a memory card is being accessed.
6 Memory card slots Insert a memory card. For more information on what types of memory cards can be
inserted into each slot, see “Inserting a memory card” on page 31.
Understanding the printer
45