Skid shoe maintenance, Center skid shoe, Wing skid shoe – Land Pride RC5010 User Manual

Page 32: Weight box skid shoe, Warning, Table of contents skid shoe maintenance

Advertising
background image

30

RC5010 & RC6010 (540 RPM) and RCM5010 & RCM6010 (1000 RPM) Rotary Cutters 318-128M

8/28/08

Land Pride

Section 5: Maintenance & Lubrication

Table of Contents

Skid Shoe Maintenance

!

WARNING!

Excessive wear on skid shoes may cause inadequate operation
of cutter and create a safety hazard!

There are two skid shoes mounted on either side of the
center section and one skid shoe on the wing section and
one on the weight box. Check all skid shoes for wear and
replace if necessary. Order only genuine Land Pride
parts from your local Land Pride Dealer.

Center Skid Shoe

Refer to Figure 5-9:

Replace center skid shoes as follows:

1.

Remove 1/2"-13 hex whiz nuts (#2), 1/2" -13 x 2” gr8
hex bolts (#3) and center skid shoe (#1) as shown.

2.

Attach new skid shoe (#1) to cutter with existing
1/2” hex bolts (#3), existing top plate (#4) and secure
with existing 1/2" hex whiz nuts. Torque to 105 ft. lbs.

3.

Repeat on opposite side of center section.

Center Skid Shoe

Figure 5-9

Land Pride Skid Shoe Replacement Parts

Part No.

Part Description

318-145H

CENTER SKID SHOE (RH)

318-146H

CENTER SKID SHOE (LH)

318-096D

WEIGHT BOX SKID SHOE

318-335D

WING SKID SHOE (S/N292792+)

802-466C

PLOW BOLT, 3/8" - 16 x 1 1/1/4" grade 5

23568

Wing Skid Shoe

Refer to Figure 5-10:

Replace wing skid shoes as follows:

1.

Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2)
and wing skid shoe (#1) as shown.

2.

Plow bolts (#2) should be checked for wear and
replaced if necessary.

3.

Attach new skid shoe (#1) to cutter with existing
3/8” plow bolts (#2) and secure with 3/8" hex whiz
nuts. Torque to 31 ft. lbs.

Wing Skid shoe

Figure 5-10

Weight Box Skid Shoe

Refer to Figure 5-10:

Replace wing skid shoes as follows:

1.

Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2)
and wing skid shoe (#1) as shown.

2.

Plow bolts (#2) should be checked for wear and
replaced if necessary.

3.

Attach new skid shoe (#1) to cutter with existing
3/8” plow bolts (#2) and secure with 3/8" hex whiz
nuts. Torque to 31 ft. lbs.

Wing Skid shoe

Figure 5-11

22173

Skid shoe
is reversible

23569

Skid shoe
is reversible

Advertising
This manual is related to the following products: