Lindy V1.21 - Manual (Page 4)

Q&A 2:
Does the Share Switch support Printer's "Status Monitor" function ?
Almost every USB Printer support Status Monitor function, but it is not
part of Microsoft Standard USB printer function. So the Share Switch
DO NOT support the "Status Monitor" function. Some printer, ex, Canon
printer, Epson printer(EPL-5700l or others), enable the Status Monitor
function will cause internal problem. It is suggested to "NEVER ENABLE" the
Status Monitor function.
Q&A 3:
How to disable "Status Monitor" function ?
Not all printer support Enable/Disable "Status Monitor". If you want
to disable the "Status Monitor". Please reference the printer's Hand Book.
Q&A 4:
Are the Share Switch automatic printing function support the "Lexmark"
printer?
No, the Lexmark using a NON-STANDARD printing solution. The Share Switch
support only the printer using Microsoft standard printing solution.
Q&A 5:
Are the Share Switch supports "USB to IEEE 1284" convert cable ?
Yes, the Share Switch support "USB to IEEE 1284" convert cable if the
cable defined as standard USB printer class, e.g. Lucent U2P cable.
Q&A 6:
How to uninstall printer if "USB Share Switch" Device is under running ?
If you want to uninstall the printer, you have to uninstall the "USB
Share Switch" first. Reboot the Windows's system then following the
printers uninstall guide.
Q&A 7:
What if my HP USB Printer cannot work while using "Automatic USB Printer
Switching" function ?
Make sure the following settings are correct:
(1) "Disable" Status Monitor:
Following the printer's handbook
(2) "Disable" Duplex:
(a) For W2K
Right click the printer ICON => <Properties> => "Ports" => "Port Settings"
=> Un-Select "Enable Duplex" => <OK>
(b) For 98, ME
Right click the printer ICON => <Properties> => "Details" => "Port Settings"
=> Un-Select "Enable Duplex" => <OK>