Lindy V1.21 - Manual (Page 5)

Q&A 1:
What if my Epson USB Printer cannot work while using "Automatic USB Printer
Switching" function ?
Make sure the following settings are correct:
(1) "Disable" Status Monitor : following the printer's handbook
(2) "Enable" Duplex:
(a) For W2K
Right click the printer ICON => <Properties> => "Ports" => "Port Settings"
=> Select "Enable Duplex" => <OK>
(b) For 98, ME
Right click the printer ICON => <Properties> => "Details" => "Port Settings"
=> Select "Enable Duplex" => <OK>
(3) "Enable" the bi-directional support:
(a) For W2K
Right click the printer ICON => <Properties> => "Ports" =>
Select "Enable bi-directional support" => <Apply> => <OK>
(b) For 98, ME
Right click the printer ICON => <Properties> => "Details" => "Spool Settings" =>
Select "Enable bi-directional support for this printer" => <Apply> => <OK>
Q&A 1:
While using Windows 2000, it always display a "Unsafe remove device" dialogue box
after printing a job. What is the problem ?
Method 1:
It's the design issue of older Windows2K version. Not every printer will display
such message box. it is suggest that you download the newest printer driver from
printer provider's Web Site, if the printer supplier update the driver.
Method 2:
Try to use the newest Windows2K version.
Q&A 1:
What to do if "Missing USB Share Switch ICON" appears ?
It is suggested that you following the procedure as described below:
(1) Un-plug the "USB Share Switch" and re-plug again. Windows system will
reload driver again. If it still fails, go to procedure (2).
(2) Re-start the Windows system.
Q&A 2:
When I plug in the printer to different USB Share Switch Port, it come out
different ICON in the Printer's folder. Which one should I use ?
In Microsoft Windows, it's correct to have different ICON for the same printer
plugging in different USB Port. This may always happen on Windows 2K. Normally,
at the last time, the ICON appear in the printer folder will be the correct
one.
COPYRIGHT
USBMON.DLL, USBPRINT.SYS is Copyright from Microsoft Corporation