Lenovo ThinkPad 43N3222 - Manual (Page 20)

To view the video content of a video or DVD disc, go to the Start menu, launch WinDVD , and click
Play .
With Microsoft Windows XP, you can also play DVD Video content by using the Windows Media Player
application.
Changing the DVD region code
Regionalization and Copy Protection (the DVD region code) uses the content scramble system (CSS)
standard to prevent unauthorized duplication of the intellectual property rights distributed on DVDs. It
was originally requested by the Motion Picture Association of America (MPAA) to address video piracy,
but is applicable to any content. CSS works by inhibiting the transmission of unencrypted data without
proper authorization. Playback systems must license CSS to decode the encrypted data.
The CSS specification divides the world into seven unique regions. Content designated for one region
cannot be read by playback systems in another region. While CSS is used to prevent digital copies of the
DVD content, another technology devised by Macrovision is used to prevent analog copies of the DVD
content. The Macrovision standard is a scrambling system widely used by the movie industry to prevent
unauthorized duplication of video content using commercial VCRs. DVD playback systems must support
both CSS and Macrovision copy protection standards.
The first time that you insert a DVD video disc into the drive, you will be prompted to set the region. If
you relocate to a different region of the world, you can use the DVD player software to change the region
code.
Note: You can change the DVD region code only five times. After you make five region code changes,
the drive can play only MPEG-2 video titles that are associated with the fifth region code that you
set.
To change the region code, complete these steps:
1. Turn on your computer and start your operating system.
2. Click Start .
3. Select Programs .
4. Click Intervideo WinDVD.
5. Click Intervideo WinDVD .
6. Click the Properties icon to open the Properties window.
7. Click the General Properties tab.
8. Insert a single region DVD of the new region.
9. Select the correct region code for your country.
10. Click OK .
Using Drag-to-Disc (DLA)
Drag-to-Disc (DLA) is provided so that you can write data to DVD-RAM, DVD-RW, DVD-R, DVD+RW,
DVD+R, CD-R, and CD-RW media. DVD-RAM, DVD-RW, DVD+RW, and CD-RW media can be written
to many times, while DVD-R, DVD+R, and CD-R media can only be formatted and written to once.
To format and write to DVD-RAM, DVD-RW, DVD-R, DVD+RW, DVD+R, CD-R, or CD-RW media:
1. Insert a disc into the drive.
2. Double-click My Computer . Right-click the CD/DVD Burner drive letter.
3. Click Format . Formatting a DVD can take up to 90 minutes.
4. After formatting is complete, you can drag-and-drop files to the CD/DVD Burner drive icon, or you
can move files in Windows Explorer.
To make CD-R and DVD-R media compatible in other computers, complete these steps:
1. Double-click My Computer . Right-click the CD/DVD Burner drive letter.
8 ThinkPad DVD Burner Ultrabay Serial ATA User Guide