Life Fitness 9500HR - Manual (Page 4)

Life Fitness Model 9500HR Treadmills
How to…Install the Support Plate on Damaged Frame Cross-Member/Bracket
NOTE: STEPS 31-33 cover BELT TENSIONING on NEW belts.
31. Prior to belt tensioning, place two pieces of tape 50” apart on the left and on the right edges of the striding belt
as illustrated.
32. Alternately tighten the two tensioning bolts 1/4 turn clockwise until the belt stretches so that the distance
between the tapes increases to 50.25”.
33. Adjust tracking as described on previous page.
NOTE: STEPS 34-36 complete reassembly.
34. Carefully turn the unit on its left side (user left) and install the rear roller guard.
35. Carefully upright the unit and install the front and rear frame caps on the right side of the unit.
36. Secure the RIGHT HANDRAIL to the FRAME using the two mounting bolts previously removed.
37. Re-install the RIGHT HANDRAIL FOOT COVER.
50”
M051-00K26-A264