Lincoln Electric POWER MIG 180 - Manual (Page 26)

C-1 ACCESSORIES C-1
POWER MIG (140, 180 MODELS)
K2525-1 - Spot Timer Kit
Timer kit, when turned on, allows you to set a fixed
weld time so that when the gun trigger is pulled the
machine will weld for a fixed time period up to 10 sec-
onds. Ideal for making consistent spot welds when
welding on thin sheet metal
K2528-1 - 045 Innershield Kit (For 230V models)
Includes everything needed to weld with .045”(1.1mm)
diameter Innershield wire. Includes an
.035”/.045”(0.9mm/1.1mm) Magnum™ 100L gun liner,
.045”(1.1mm) Contact Tip, gasless nozzle, knurled
drive roll, .045”(1.1mm) inner wire guide, and a 10 lb.
(4.5kg) spool of .045"(1.1mm) Innershield® NR®-212
wire.
K2532-1 - Magnum 100SG Spool Gun
Designed to easily feed small 4"(102mm
)
diameter
(1lb.-.5kg spools of) .030”(0.8mm) or .035”(0.9mm)
aluminum wire. Includes gun, adapter kit, three extra
.035”(0.9mm) contact tips, gas nozzle, and spool of
Superglaze 4043 .035"(0.9mm) diameter welding wire.
Packaged in a convenient carry case.
K2377-1 - Small Canvas Cover
Protect your machine when not in use. Made from
attractive red canvas that is flame retardant, mildew
resistant and water repellent. Includes a convenient
side pocket to hold welding gun.
For additional Optional and Miscellaneous Parts
(See Parts Pages)