LevelOne WNC-0101USB - Manual (Page 34)

33
!
Caution:
WEP Key needs to be the same for all IEEE802.11b compliant
stations.
Follow the steps below to set your WEP:
(1) Select the Encryption type: 64bit or 128bit.
(2) Type WEP Key: If you select 64bit, you must type 10
values in the following range (0~F) from Key1 to Key
4 space. Besides, if you select 128bit, you must type
26 values (0~F) in each WEP Key from Key 1 to Key
4. Please note that all the WEP Keys (key1~key4)
have to be filled.
(3) Select WEP Key: Select one of WEP Key from Key1
to Key4 for using.
(4) Choose the WEP Mode: Mandatory for
communicating with all stations having WEP
enabled or Optional for WEP disabled.
(5) Select the Authentication Type: Open System or
Shared Key.
(6) After all the settings are completed, click on Submit
button to save the setting.