LevelOne WNC-0101USB - Manual (Page 44)

43
z Powered up and logged on to the network.
z Configured to operate with identical Microsoft
Network settings concerning:
„ Networking Protocol.
„ Wireless Network Name.
To enable the sharing of Internet access, you should set your
LevelOne 11Mbps Wireless USB Adapter mode as
“Infrastructure“ and connect to the access point. When the
procedure is completed, an access point will appear on the
Wireless LAN Neighborhood of the LevelOne 11Mbps Wireless
USB Adapter Utility. Double-click it to enter the Network
Neighborhood folder. This folder contains the links to all the
computers in your workgroup on the entire network.