Lindy 51535 - Manual (Page 2)

3. Select the option “Search for the best driver in these locations.” and click on
“Next”
4. Click “Next” and then “Finish” respectively.
5. Remove the diskette, then select “Yes” to restart the computer for the setup to
take effect.
To verify successful installation in Windows  2000:
1. From the main desktop, click on My Computer, then double-click on Control
Panel, System, and Device Manager.
1. Double-click on either Ports (COM & LPT) or Serial port device
options. PCI I/O Board should be displayed when successfully installed.
The port is ready to connect new device.
Windows XP Driver installation :
1. At the Add New Hardware Wizard windows

, click on “Next”
2. Select the option “Install from a list or specific location (Advanced)” and
click on “Next”
3. Select the option “Search for the best driver in these locations.” and click on
“Next”
4. Click “Next” and then “Finish” respectively..
5. Remove the diskette, then select “Yes” to restart the computer for the setup to
take effect.
To verify successful installation in Windows

XP:
1. From the main desktop, click on My Computer, then double-click on Control
Panel, System, and Device Manager.
2. Double-click on either Ports (COM & LPT) or Serial port device options. PCI
I/O Board should be displayed when successfully installed. The port is ready
to connect new device.
Windows VISTA Driver installation:
1. Start power to RUN VISTA
2. CD drive to CD-ROM
3. Click on “Locate and install driver software (recommended)”.