Lucent Technologies MERLIN LEGEND 6 - Manual (Page 251)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-21 Programming from a PC with SPM
6
Console/Display Instructions Additional Information
!  If the PC does not have a hard disk, insert the SPM diskette into Drive A.
!  Type à B and press I .
6)3 appears on the screen.
!  Type TQN and press I to display the SPM Welcome screen shown below.
! 
Press any key to display the SPM Main Menu shown below.
■ If the SPM Main Menu does not appear or if the information about the
screen is garbled, press any key again.
■ If the COMM PORT (communications port) screen appears instead of the
SPM Main Menu, the SPM software has not been initialized. See Chapter 2
of
System Programming.
NOTE:
The function keys shown on either side of the display are included
here for quick reference. On the PC screen, the system
programming keys do not look like actual keys.
! 
To reach the System Programming menu, select T’†ÃQ ‚t h€Ã by pressing
Ã
.
!  Perform the procedures in the task descriptions as outlined in this chapter.
ÃÃÃÃXryp‚€rǂÃTQH YYY = current version of SPM
ÃUurÃH@SGDIÃG@B@I9
ÃT’†‡r€ÃQ ‚t h€€vt
ÃÉÃHhv‡rhprÃV‡vyv‡’
ÃQyrh†rà r††Ãh’Гxr’
ГГГГГ‡‚Гp‚‡vˆr
ÃÃÃÃÃWr †v‚ÃYYY
ÃÃÃÃTQHÃHhvÃHrˆ
Hrˆ)ÃTryrp‡ÃAˆp‡v‚
Ã
T’†ÃQ ‚t h€ Hhv‡rhpr
И
Д
7hpxˆƒ Sr†‡‚ r
Й
Е
7‚h q† Qh††Uu ˆ

Æ
Q v‡ÃPƒ‡† Qh††‚ q

Ç
H‚v‡‚ Ghtˆhtr