Lindy SD-CBALINEC-4E6I - Manual (Page 3)

2
Pin Assignment for Internal USB connectors (If available)
Installing the ALi Firewire IEEE 1394A + USB 2.0 Combo card
Installing this ALi Firewire IEEE1394A + USB 2.0 Combo card to your computer is simple, just simply
follow these steps.
•
Turn off your computer and all external devices connect to it.
•
Disconnect your computer from the power sources.
•
Open the computer case. Refer to your computer user manual for more details.
•
Find an available PCI slot and remove the slot bracket. Save the bracket screw for later use.
•
Align the combo card horizontally with respect to the PCI slot and insert it into the slot firmly and
evenly. Take care not to force it into the slot. Once you have properly positioned the combo card
into the slot, fasten it to the computer case with the bracket screw you have saved.
•
Secure the computer case and switch on your computer.
Driver Installation
You need to install three types of driver before the combo card function properly.
1. 1394 Bus Controller driver
2. ALi PCI to USB Open Host Controller driver
3. ALi PCI to USB Enhanced Host Controller driver
For Windows 98/98SE/ME/2000 & XP Operating System
1. Installing 1394 Bus Controller driver
This combo card is compliant to IEEE 1394 OpenHCI Specifications and compatible with Microsoft
OHCI, DV, and SBP-2 driver in Windows 98, Windows 98SE, Windows Me, Windows 2000, and
Windows XP operating system. Full driver support by Microsoft OpenHCI based drivers, no additional
driver required. Simply have your Windows O/S Installation CD ready when Windows Installation
Wizard prompts for the location of the driver.
2. Installing ALi PCI to USB Open Host Controller driver
Windows should detect three “ALi PCI to USB Open Host Controller”, no additional driver required.
Full driver support by Microsoft OpenHCI based drivers. Simply have your Windows O/S Installation
CD ready when Windows Installation Wizard prompts for the location of the driver.
Note: Make sure you have your Microsoft Windows O/S Installation CD ready before installing this
Firewire IEEE 1394A + USB 2.0 Combo card.