Life Fitness Sport and Essential Consumer Treadmills - Manual (Page 2)

ASSY INSTRUCTIONS, KIT, FT BUSHING 77650901
2
Wiring Harness Connector
L-Brackets
BUSHING REPLACEMENT - CONTINUED
10. Remove the bolts and L-Brackets
from the bottom of the uprights, then
lower the uprights against the deck
and disconnect the Console Wiring
Harness Connector on the left side,
and then set the uprights aside.
11. Using two pieces of wood blocks
4”x4”x30”, turn the unit upside
down against the wooden blocks as
shown.
Note: Make sure that treadmill is stable
on the supports.
12. Remove the two screws securing the grounding
strap.
Supports
Unit Inverted on Supports
Ground Strap