Linksys WAP54GP - Manual (Page 26)

20 Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet
The Wireless - Wireless Network Access Tab
Wireless-G Access Point with Power Over Ethernet
The Wireless - Wireless Network Access Tab
This screen allows you to permit or block wireless access for computers with specific MAC addresses.
Wireless Network Access
You can allow or block access for the MAC addresses you have entered.
Access List. To permit access, click Permit to access. To deny access, click Prevent from accessing. If you do
not wish to filter users by MAC address, select Disabled.
MAC 1-20. Enter the MAC addresses of the computers whose access you want to control.
Select MAC Address from Networked Computers. If you want to select a MAC address from a list, click this
button. The MAC addresses for your computers will be automatically displayed. Click the checkboxes of the MAC
addresses you want to add to your access list. Change these settings as described here and click Apply to apply
your changes. Click Refresh to retrieve the latest MAC addresses. Click Close to close this screen and return to
the Wireless Network Access screen.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Click Help for more information.
Figure 5-9: Wireless - Wireless Network Access Screen
mac address: the unique address that a manufacturer
assigns to each networking device.
Figure 5-10: Select MAC Address Screen