Linksys WAP54GP User Manual
Page 63
57
Appendix H: Regulatory Information
Wireless-G Access Point with Power Over Ethernet
The following standards were applied during the assessment of the product against the requirements of the
Directive 1999/5/EC:
•
Radio: EN 300 328
•
EMC: EN 301 489-1, EN 301 489-17
•
Safety: EN 60950
CE Marking
For the Linksys Wireless-B and Wireless-G products, the following CE mark, notified body number (where applicable), and
class 2 identifier are added to the equipment.
Check the CE label on the product to find out which notified body was involved during the assessment.
or
or
NOTE: The full Declaration of Conformity can be found either on the CD or a separate document included with
this product.
If you need any other technical documentation, see the “Technical Documents on www.linksys.com/international”
section, as shown later in this appendix.