Lexmark OptraImage 232 - Manual (Page 15)

OptraImage Setup Guide 15
Step 8: Set default copy settings
There are two ways to set the copy default settings for the
OptraImage.
Method 1: Use the OptraImage resident web
page.
1 Type the IP address of the OptraImage in the URL field of
your browser (for example, http://192.168.236.24), and
then press Enter.
2 Click Configuration.
3 Select Copy Setup from the OptraImage menu.
Many of these settings depend on the
type of printer and scanner you have. The Copy Setup page has the following settings available:
• Content
• Copy Media
• Paper Saver
• n-up frame
• Duplex
• Finishing
• Original Size
• Copy Size
• Scaling
• Default Darkness
• Output bin
• Number of Copies
• Factory Defaults
4 After you select your settings, click Submit.