Life Fitness 95Ti - Manual

Life Fitness Model 97Ti, 95Ti, 93T Treadmills
How To...Replace or Install Rear Roller Guards
Tools Required: Philips Screwdriver, Flat Blade Screwdriver
1. For either configuration, remove the ROLLER GUARDS by unscrewing the MOUNTING SCREWS as
shown.
2. Using a flat blade screwdriver, remove the GROMMET
and WASHER.
3. Discard the WASHER.
4. Reinstall the GROMMET.
NOTE: Use caution to prevent personal injury or
damage the to paint.
Rear Roller
Guard, LF
Round Grommet
Roller Guard
Screw (4)
Rear Roller
Guard, RT
Square Grommet
Screw
Washer
Configuration 1
Low Profile
Grommet
Grommet
Roller Guard,
(RT)
Roller Guard Screw
Roller Guard
Screw
Configuration 2
Washer Grommet
Re-install Grommet
w/o Washer