Liebert Libert XD Chiller (XDC) With iCOM Controls DPN001599 REV 12/11 - Manual (Page 3)

REFER TO SL-16655, LIEBERT XTREME DENSITY SYSTEM DESIGN MANUAL, AND SL-16674, LIEBERT XDC USER MANUAL FOR ADDITIONAL DETAIL.
DPN001599 REV 12/11
REV 4
LIEBERT XD CHILLER (XDC) WITH iCOM CONTROLS
PAGE 3/6
DIMENSIONS ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
44in
1118 mm
~
47in
1194 mm
6in
152 mm
23in
584 mm
Install Replaceable Filter Drier Assembly
in Liquid Supply Line
Orientation
Defined by
Installer.*
To First Cooling Module or
Bypass Flow Controller **
* Allow 8in (204mm) Of Clearance For Filter Replacement.
Filter assembly may be positioned horizontally.
** To Ensure All Refrigerant Flow is Filtered, Install the Filter
Drier Assembly Between the Discharge Line of the Liebert
XDC and the first Bypass Flow Controller or the first
Liebert XD Cooling Module.
21in
533mm
8in
203mm *
22in
559mm
3 1/4in
83mm
Liquid Supply Line
To Cooling Units
Hot Gas Refrigerant Lines
Liquid Refrigerant Lines
C
D
XDC160 2-1/8 1-1/8 1-3/8 7/8
MODEL
50/60 HZ
UNIT PIPING OUTLET CONNECTION SIZES, inches
A
OD CU
B
OD CU
C
OD CU
D
OD CU
Return Line From
Cooling Units
(line is spin closed)
(elbow customer provided)
A
B