LevelOne ServCon FPS-3003 - Manual (Page 6)

1
Congratulate on your purchase of this LevelOne FPS-3003, 2-port
USB/MFP server. This document describes the steps for installation
and configuration of FPS-3003 as a Print/File/Scan server in Windows
environment. Refer to the User’s Manual in the bundled CD-ROM for
more details.
This Setup Guide is only for Windows users.
If you use FPS-3003 in Unix/Linux, please refer to the User’s Manual
in the bundled CD-ROM for more details.
Package Contents
If any item is missing, please contact the vender.
●
One FPS-3003 USB/MFP Server.
●
One FPS-3003 MFP Control Center Software CD.
●
One AC Adaptor.
●
This Quick Installation Guide.
OS Requirements
●
Windows 98 SE/ME/2000/XP/2003
●
HP-UX, Unix, Linux and RFC-1179 LPD System
Connect the FPS-3003
Please refer to Fig1, physical description.
1. Connect FPS-3003 to the network, such as a LAN switch or a
LAN hub, using a LAN cable.
2. Connect FPS-3003 to USB printers, hard drives, flash ROM
disks, or HP OJ (Office Jet) series printers (MFP) using USB
cables.
3. Connect FPS-3003 to the power jack using the power
adaptor (included in this package).
English