LevelOne ServCon FPS-3003 - Manual (Page 7)

2
Install Utility
1. Insert the included CD-ROM (FPS-3003 USB MFP Server
Product CD) into the personal computer. The autorun screen
as Fig2 should appear
2. Click Install Product button.
3. Click Next, if you see any Next button in installation
windows.
4. Click Finish.
Configure FPS-3003 with Utility
Using Control Center Software(Fig3):
i. Open the FPS-3003 Control Center. It will
automatically search the existing servers and
display their status.
ii. Select the server that you want to configure.
Double click the selected server and enter
Administrator (default: admin) and Password
(default: admin).
iii. Name your FPS-3003 server and select a code page
for file server function as Fig4. Please enter server’s
host name and workgroup for Windows networking
by SMB protocol. If you want to use the file server
function, you have to set the same code page as
that your Windows PC is using.
iv. Assign IP address to FPS-3003 as Fig5. Please
choose the one method to set the IP address of the
server. You can automatically get IP by using DHCP
or manually assign an IP to the server.