LG NETWORK BLU-RAY DISC BD640 - Manual (Page 28)

System Setting 28
S
ys
tem Se
tting
3
DTS Neo:6
If the unit is connected to the multi-channel Audio
Receiver by HDMI connection, set this option to
enjoy the multi-channel surround sound with the
2-channel audio source.
[Off]
Outputs the stereo sound via front speakers.
[Music]
Outputs the multi-channel sounds that are
optimized for listening to music.
[Cinema]
Outputs the multi-channel sounds that are
optimized for watching movie.
y This function is not available on an on-line
service.
y Only the audio source with less than 48
kHz sampling frequency is available for this
function.
y This function is availabe only when [HDMI]
option is set to [PCM Multi-Ch].
, ,
Note
[LOCK] Menu
The [LOCK] settings affect only CinemaNow movie,
Blu-ray Disc and DVD playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the unit.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
, ,
Note
BD651D-N_US_MP_BALCK.indd 28 2011-01-21 �� 4:58:19