LSI Ultra320 - Manual (Page 17)

Ultra320 SCSI to PCI-X Host Adapters User’s Guide 2-1
Version 2.1 Copyright © 2002-2003 by LSI Logic Corporation. All rights reserved.
Chapter 2
Detailed Host Adapter Installation
This chapter provides detailed instructions on how to install the LSI Logic
Ultra320 SCSI to PCI-X host adapters and includes these topics:
•
Section 2.1, “Installing your Ultra320 SCSI Host Adapter,” page 2-1
•
Section 2.2, “SCSI Device Cables,” page 2-4
•
Section 2.3, “Connecting SCSI Devices,” page 2-6
•
Section 2.4, “Terminating the SCSI Bus,” page 2-11
•
Section 2.5, “Setting SCSI IDs,” page 2-12
•
Section 2.6, “Completing the Installation,” page 2-13
2.1 Installing your Ultra320 SCSI Host Adapter
This section provides detailed instructions for installing your host adapter
and connecting your SCSI devices to it. The following illustrations show
the LSI22320-R Dual Channel Ultra320 SCSI host adapter. However,
these illustrations apply to all host adapters. For more information about
all the Ultra320 SCSI host adapters, see
Chapter 3, “Ultra320 SCSI Host
Adapter Characteristics.“
2.1.1 Selecting a PCI Slot
Step 1. Turn off and unplug your computer
Warning: Be sure to disconnect the computer’s power before you
remove the cover and install the Ultra320 SCSI host
adapter.
Step 2. Open your computer cabinet by removing its cover.
Step 3. Be sure to touch a grounded metal surface to discharge static
electricity before removing the host adapter from its package.