Reset configuration – Lindy CPU IP Access Switch Plus User Manual
Page 38
37
Reset configuration
This option allows you to
completely reset the CPU IP.
Reset Config
DO YOU WISH TO CONTINUE?
Cancel
RESET
WARNING: Continuing will cause
your existing configuration to
be erased.
The unit will then reset and
require re-configuring before
it can be used.
To get here
1 Use the local keyboard and log on as the ‘admin’ user.
2 Press
(hotkeys may be different).
3 Select ‘Configuration’.
4 Select ‘Reset configuration’.
WARNING: This process will remove all settings and return the unit to use its
original state. A complete reconfiguration will be required before it can be used.
To reset the CPU IP configuration
1 With the RESET option highlighted, press
.
2 The first screen of the initial configuration process will be displayed. See