Advanced unit configuration, Remote configuration, Idle timeout – Lindy CPU IP Access Switch Plus User Manual
Page 48: Option ser
47
Advanced unit configuration
Click this button to display several advanced options that do not normally
require alteration.
Force VNC protocol 3.3
IMPORTANT: The use of this option is not recommended. Protocol 3.3 is a legacy
version that does not offer any encryption.
Idle timeout
Determines the period of inactivity on a remote connection before the user
is logged out. The idle timeout period can be set to any time span, expressed
in minutes. Note: The
option serves a similar purpose for local
connections.
Protocol timeout
Sets the time period by which responses should have been received to outgoing
data packets. If the stated period is exceeded, then a connection is considered
lost and terminated.
Background refresh rate
Use the arrow keys to alter the refresh rate for screen images via remote links.
This allows you to tailor the screen refresh to suit the network or modem
connection speeds. The options are: Slow, Medium, Fast or Disabled. When the
disabled option is selected, the remote users will need to manually refresh the
screen.
Note: When a low connections speed is detected, the background refresh is
automatically disabled, regardless of the settings of this option.
To get here
1 Using VNC viewer or a browser, log on as the ‘admin’ user.
2 Click the ‘Configure’ button in the top right corner.
3 Click the ‘Unit configuration’ option.
4 Click the ‘Advanced unit configuration’ option.