Call waiting, To toggle between calls, To disconnect a call – Linksys SPA941/SPA942 User Manual
Page 9: To temporarily cancel call waiting, Conferencing, To add a party to the current call, Directed call pickup, To answer a phone in your pickup group
Call Waiting
Lets you put one call on hold while you
answer a second call. You may then
alternate between the two calls.
To toggle between calls
•
Press the red blinking line key. You
will be connected to the incoming
call and the first call is put on hold.
•
Repeat to toggle between calls.
To disconnect a call
•
Hang up the phone while on that
line.
•
Press the red blinking line key to
answer the remaining call.
To temporarily cancel call waiting:
•
Dial *70
•
Dial the desired number
Conferencing
Conferencing enables you to talk to
multiple parties simultaneously.
To add a party to the current call
•
Inform the current party that you’ll
be starting a conference
•
Press the conf softkey
•
The call is placed on hold and you
will hear dial tone
•
Dial the phone number of the party
you wish to dial and press the dial
softkey
•
Inform them of the conference
•
Press the conf softkey again to
bring in the 3rd party
•
You are now in conference with
both parties. Repeat the process to
add additional parties.
Directed Call Pickup
Directed Call Pickup lets you answer a
specific ringing phone within your
Directed Call Pickup Group.
To answer a phone in your pickup
group
•
Dial *12
•
At the dial tone, dial the extension
you wish to answer.
FeatureTel Linksys IP Phone User Guide
Page 9