Lincoln Electric K520 UTILITY IM468-A - Manual (Page 12)

A-6 A-6
OPERATING INSTRUCTIONS
The Utility Cart is designed for hand moving only. Do
not attempt to pull the cart with any mechanized vehi-
cle.
Use the cart on a level surface only. Moving the cart
over steep inclines could cause the cart to roll out of
control, or tip over. Either situation could result in
damage to the cart, welder, or injury to the operator.
The K520 Utility Cart is designed to work only with the
Lincoln products listed below. Use with other welders
or equipment could cause overloading, or result in
unstable operations.
PRODUCTS SUPPORTED:
AC225-C
INVERTEC V160-S, INVERTEC V160-T
INVERTEC V205T AC/DC
PRO-CUT 25
Pro-MIG 175, Pro-Core 100
MIG PAK 10, MIG PAK 15, PRO 100, PRO 155,
PRO MIG 135
SP-75, SP-85, SP-100, SP-100-I, SP-100 T,
SP-125 PLUS, SP-130 T, SP-135T, SP135PLUS,
SP-140-I, SP170-I, SP-170 T, SP-175T, SP175 PLUS
Weld-Pak 100, Weld-Pak 100 HD, Weld-Pak 100
PLUS, Weld-Pak 125, Weld-Pak 155, UWW 170
Weld-Pak 175HD, Weld-Pak 3200HD,
Weld-Pak 5000HD
Weldmark 135 Plus