Lexmark S600 - Manual (Page 6)

Use the To
11 Paper feed guard Prevent items from falling into the paper slot.
2
1
8
7
4
3
5
6
Use the To
1 Scanner lid Access the scanner glass.
2 Scanner glass Scan and copy photos and documents.
3 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
4 Power supply with port Connect the printer to a power source.
5 Duplex unit • Print on both sides of a sheet of paper.
• Remove paper jams.
6 Printhead access Install the printhead.
Note: The carrier moves to the printhead access area when no printhead
is installed in the printer.
Use the To
7 Ink cartridge access Install, replace, or remove ink cartridges.
8 Scanner unit • Access the ink cartridges and printhead.
• Remove paper jams.
Using the printer control panel
The following diagrams explain the sections of the printer control panel:
Note: The icons are displayed when they are selectable on the current screen. If an icon is not displayed,
then the function is not available.
1 2 4
5 6 7
3
Use To
1 Power • Turn the printer on and off.
• Switch to Power Saver mode.
Note: When the printer is on, press to switch
to Power Saver mode. Press and hold for three
seconds to turn off the printer.
2 Back • Return to the previous screen.
• Exit from one menu level to a higher one.
3 Touch screen display
Note: The display is turned off in Power Saver
mode.
• Navigate the printer menus.
• Change settings.
• View printer messages and animation.
6