Lucent Technologies 6000 - Manual (Page 272)

5-24 Preliminary January 4, 2001 MAX 6000/3000 Network Configuration Guide
Configuring Frame Relay
Concentrating incoming calls onto Frame Relay
The following set of parameters configures FR Direct Connection profiles for the incoming
calls:
Ethernet
Connections
caller-1
Station=caller-1
Active=Yes
Encaps=PPP
Encaps options
Recv PW=caller1*3
IP options
LAN Adrs=10.5.6.7/32
Session options
FR Direct=Yes
FR Prof=fr-dte
FR Dlci=72
Ethernet
Connections
caller-2
Station=caller-2
Active=Yes
Encaps=PPP
Route IP=Yes
Encaps options
Recv PW=caller2!!8
IP options
LAN Adrs=10.5.6.7/32
Session options
FR Direct=Yes
FR Prof=fr-dte
FR Dlci=72
Following are comparable RADIUS profiles:
caller-1 Password="caller1*3", User-Service=Framed-User
Framed-Protocol=PPP,
Framed-Address=10.5.6.7,
Framed-Netmask=255.255.255.255
Ascend-FR-Direct=FR-Direct-Yes,
Ascend-FR-Direct-Profile="fr-dte",
Ascend-FR-Direct-DLCI=72
caller-2 Password="caller2!!8", User-Service=Framed-User
Framed-Protocol=PPP,
Framed-Address=10.7.8.9,
Framed-Netmask=255.255.255.255
Ascend-FR-Direct=FR-Direct-Yes,
Ascend-FR-Direct-Profile="fr-dte",
Ascend-FR-Direct-DLCI=72